On the left are two of the roll-on bottles tops cut from the bottle. On the right is a
close up of a roll on ball drilled out with a piece of wire thru the center. I also
wrapped wire around the rim  and hot glued it in place. This was how I connected
two eye together.
Heres two pictures just showing the eye movement connected. I was going to hot
glue a pair of eyes on to the wire with the hot glue on the tips. Theres better
pictures below.
I layed the eyes in place in the picture on the left. And on the right I`m holding the
eye so you can see how it was to be mounted on the movement.